Audio Pood

Hi-Fi audio tooted

Vinüülplaadimängija Pro-Ject RPM 10 Carbon (ilma helipeata)

Helipea: ilma helipeata
Akrüül tolmukate tuleb lisaks osta


Kvaliteetne vinüülplaadimängija tootjalt Pro-Ject. Pro-Jecti helitehnika toodetakse käsitööna Euroopas.


NB! Vinüüplaadimängija tuleb ilma tolmukatteta. Otseviide tolmukattele

High-end turntable with 10“ Evo tonearm

Clever design with true high-end sound quality

The RPM 10 Carbon uses a new extra heavy chassis which features a special CNC machined MDF plate that incorporates hard resin coated steel pellets to form an extra heavy precise sandwich construction. A special complex heat treatment and a carbon surface coating ensures superior low resonance levels. The mass-loaded chassis is effectively decoupled from its surface via the included Ground it Carbon and its magnetic feet. With two magnets located in the feet, the turntable is practically floating. The studs in the feet are only used for keeping them centered. Due to this unique feature the turntable is perfectly decoupled from the surface it is placed on. Combined with a new special polished aluminium platter with internal TPE damping and a vinyl layer on top, the inverted ceramic main bearing delivers an absolute stable turntable speed with extra low rumble. The extra heavy outboard motor unit is equipped with a precise motor control and features a built-in switch between 33 & 45 rpm. Last but not least the non-compromise 10“ Evo tonearm with conical carbon-fibre armtube and inverted bearing design ensures perfect tracking, even with demanding cartridges. Highly flexible top-grade copper internal wiring. Delivered with topgrade 5P phono cable „Connect it CC“ with RCA plugs (XLR as an option).

In the box:

  • RPM 10 Carbon (with or without Ortofon Cadenza Red)
  • Connect it 5P-CC Phono Cable
  • Ground it Carbon
  • Record puck
  • Adapter for 7“ singles
  • Power supply, spirit level
Speed 33, 45 (electronic speed change)
Drive principle Belt drive
Platter 10.4 kg aluminium (300 mm diameter)
Mains bearing Inverted stainless steel with ceramic ball/plate
Speed drift 33: +/- 0.11% I 45: +/- 0.10%
Wow & flutter 33: +/- 0.01% I 45: +/- 0.01%
Signal to noise 73dB
Tonearm 10” EVO carbon
Effective arm length 254 mm
Effective arm mass 8.5 g
Overhang 16 mm
Tracking force 10 – 35 mN
Included accessories 15 volts DC / 1600 mA power supply
Power connection 110/240 Volt – 50 or 60 Hz
Power consumption 15 Watts max / < 0.3 watt standby
Dimensions 480 x 210 x 330 mm (WxHxD)
Weight (Turntable) 22,0 kg net
Weight (Base) 14,5 kg net